![Airborne Ivan](/img/default-banner.jpg)
- 86
- 237 410
Airborne Ivan
Приєднався 15 кві 2010
All things firearms and training related. This is my way of sharing my experiences with the hobbies I love.
Optics Series: Pro's & Con's - Magnifiers
Part 2 - We go over magnifiers. Their Pro's and cons and what I believe a red dot/magnifier combo excels at.
Переглядів: 50
Відео
Optic Series: Pro's & Con's - Red Dots (Reflex, Holographic, 1x Prismatic)
Переглядів 133День тому
I decided to start an Optics Series to cover the pro's and con's of each time. while I do provide my opinion on where I believe these optics live, in terms of civilian practical use (SHTF, Societal Colapse, WROL, etc) I hope to provide an objective guide for potential consumers to aid in their decision making process.
Criterion Core 12.5" Accuracy Conclusion (Pt.3)
Переглядів 46214 днів тому
Here's the final update on the Criterion Core 12.5" barrels' accuracy potential. I tested six precision loads: 3 - 69gr loads & 3 - 77gr loads. - Norma 69gr Gold Target Match - Winchester Match 69gr SMK - Federal Premium 69gr SMK - PMC X-TAC Match 77gr OTM - AAC Precision 77gr OTM - Federal Premium 77gr SMK Suffice it to say, this barrel is extremely accurate, considering it's a chrome lined ba...
Criterion 12.5" Accuracy Testing Update (Pt. 2)
Переглядів 28521 день тому
Just a quick update discussing my recent range trips testing the accuracy capabilities of Criterion's 12.5" Core series barrel. Short of it, after about 90 rounds, the accuracy took a big leap in how tight the group sizes got. Going from a 1.3-1.5 MOA gun to a sub MOA gun.
Criterion 12.5" First Rounds / Initial Accuracy Testing (Pt. 1)
Переглядів 138Місяць тому
Here's the first rounds down range with my 12.5" pistol using the Criterion Core 12.5" barrel. I'm running a series of loads to initially test the accuracy potential of this barrel and to see if this barrel lives up to the Criterion hype within the community. I will say, Criterion has this gassed perfectly for suppressed and unsuppressed use. I was blown away by how well it was gassed and how s...
Criterion Core 12.5"
Переглядів 384Місяць тому
I go over the Criterion 12.5" Core barrel. This is a replacement for my Triarc Track 2.0 12.5" barrel that's been on my Go-To rig.
Is AAC Making a Comback / Ranger 5 Review.
Переглядів 3672 місяці тому
Here, I review AAC's newest 5.56 silencer, the Ranger 5. Tested over the course of 3 months through classes and fun shoots. I've been extremely impressed by the performace of this can. While I am not a proffessional by any means when it comes to firearms and accessories, i do apply basic diagnostic and troubleshooting guidelines that I've learn over the 20 years as a diesel technician that i fi...
Flashlight Discussion / In Field Use (Part2)
Переглядів 312 місяці тому
Here's the flashlight previously mentioned in the last video. I do my best to showcase their strengths and weaknesses. Unfortunately, my camera sucks in extreme-low light conditions and looks very grainy. Unfortunately, this was the best I could do with my setup and a mobile editing app.
Flashlight Discussion & Viable Options (Part 1)
Переглядів 452 місяці тому
SORRY FOR THE AUDIO ISSUES Here, I briefly talk about an issue that has become prevalent in the 2A community... tactical elitism pertaining to weapons mounted lights (WML's). too often you hear individuals talking down on others who may not be able to (justifiably) drop up to $400 on a weapon light. if you can afford it and want it, by all means, get what you want. The bigger issue is a type of...
Midwest Industries Combat Rail Failure & Fix
Переглядів 4263 місяці тому
After attending a class, I noticed my rail was loose enough that I could rotate my rail within the tolerance of the anti-rotation tabs with some pressure. after contacting MI, they sent me an updated version of their barrel nut. this corrected my issue. here, I cover what I found in the process.
Rost Martin RM1C - Accurate & Affordable
Переглядів 1,7 тис.6 місяців тому
*My apologies for the low audio. I was having issues with my mics* Here, I review the Rost Martin RM1C. A new American made pistol to the market from a brand new company based out of Dallas, Texas. This new pistol squeezes its way into a saturated compact pistol market that's been dominated by the likes of Glock, Smith & Wesson, Sig Sauer, etc, but at an extremely competitive price point, and i...
Project Revamp Pt. 4 (Final Build)
Переглядів 4108 місяців тому
Wrapping up the series, I give a quick run down of the components, followed by accuracy testing and my final thoughts
Project Revamp Pt. 3 (B5 Systems Precision Stock)
Переглядів 1,3 тис.8 місяців тому
Here's part 3 of my Revamp. here I cover the B5 Systems Precision Stock and why I chose this over the other prominent options.
Project Revamp Pt. 2 (Vltor A5 Buffer System)
Переглядів 6088 місяців тому
Here, I cover the Vltor A5 buffer system that I'm installing on my SPR build, and why I'm switching to this system.
Project Revamp Pt. 1 (Cross Machine Tool 15" UHPR Mod 2 HDX)
Переглядів 7888 місяців тому
Here's pt 1 of a short series when I bring new life to my old budget SPR build. I go over the first upgrade which is the handguard.
Primary Arms Nova - Budget Perfection????
Переглядів 3,7 тис.11 місяців тому
Primary Arms Nova - Budget Perfection????
Condor 3 Day Assault Pack - Still Worth It???
Переглядів 2 тис.Рік тому
Condor 3 Day Assault Pack - Still Worth It???
Primary Arms PLx Compact 1-8x24 FFP Griffin Mil M8
Переглядів 3 тис.Рік тому
Primary Arms PLx Compact 1-8x24 FFP Griffin Mil M8
Tech Tip: Remedy For Excessive Reciever Play
Переглядів 144Рік тому
Tech Tip: Remedy For Excessive Reciever Play
Tech Tip: Gas Block, Gas Tube, Alignment, Inspection Illumination Tool
Переглядів 465Рік тому
Tech Tip: Gas Block, Gas Tube, Alignment, Inspection Illumination Tool
Palmetto State Armory 13.7" Sabre Review (So Much Potential)
Переглядів 23 тис.Рік тому
Palmetto State Armory 13.7" Sabre Review (So Much Potential)
Palmetto State Armory Gen 3 PA-10 Revisited (Still A Viable Option???)
Переглядів 11 тис.Рік тому
Palmetto State Armory Gen 3 PA-10 Revisited (Still A Viable Option???)
Goonbeam V1 & V2 Long Gun Weapon Lights
Переглядів 2,9 тис.Рік тому
Goonbeam V1 & V2 Long Gun Weapon Lights
Sage Dynamics K9 12.5" Patrol Final Accuracy Test (Post Correction)
Переглядів 1,3 тис.Рік тому
Sage Dynamics K9 12.5" Patrol Final Accuracy Test (Post Correction)
Sage Dynamics K9 12.5 Patrol Accuracy Test Part 1
Переглядів 591Рік тому
Sage Dynamics K9 12.5 Patrol Accuracy Test Part 1
Considering on of the Triarc tracker 2.0 12.5” barrel but they are NEVER in stock. Where did you find yours?
@Jeepster008 I got mine through Primary Arms, but I have to be honest, I've had some bad luck with those barrels. I mean, the shoot is great, and they're soft shooting, but I've been through two barrels in less than 5000 rounds due to the lands chipping away. I've been dealing with their warranty department for the last 3 months on my most recent barrel, and I've yet to get a determination on my barrel I sent in over a month ago or whether they'll replace it or not.
@Jeepster008 I suggest taking a look at Criterion. They make great barrels, imo, and you can get really good deals on them through ar15discounts.com. MSRP on my Criterion Core 12.5 barrel is $329.99. I got it from ar15discounts for $266.47.
@@airborneivan Thanks for the tip. I'll check them out. I hear good things about the Criterion Core barrels. I've have a Criterion barrel on my match M1 Garand and it shoots well.
@Jeepster008 Absolutely! This is my first experience with Criterion, and I've been impressed.
Ythey just made a new curved mag thats all black n look like scorpion mags. They look great. Curved with orange follower and they running for 38$ to 41$.
I just saw the email from Global Ordnance. They look good. Hopefully, this the last time they'll be mag issues. They definitely jumped in price.
I learn something new 👍
You don't need combat exp to comment on gears. Most of us just larp anyways so as long as it looks cool then it is good
@mrguiltyfool that's true. I try to be as practical as possible, and I look at everything from a prepared civilian perspective, but you know how it is. A lot of people only value the opinions of former Operators or battle hardened vets.
That got it. thanks.
DJ Khaled got a guntube channel?
@@crunchyknees3622 AND ANOTHER ONE!!!
@@airborneivanchecked out your videos and thank you for the m&p 2.0 9 compact and flashlight compatibility with the safari land holster 6360
@topcat8349 awesome. Hopefully, it helped.
I used your videos as part of my research for a AR-10. Bought gen3 in 20" ss. Amazing gun for the money. Used as an overwatch. Haven't missed yet. Would recommend.
@@geraldalsup560 I'm glad my video was able to get you.
Thank you for a true a honest Video, when a company states this us our BEST I'm gonna hold them too it, although I love the idea of PSA, I can't trust them, had a upper that was just a paperweight, kept gouging brass that gunpowder would be every where, bullets would hit top of barrel extension, I sent it back, never getting any correspondence, finally got it back it was never fixed, same way I sent it is the way it came back, Finally took it too my Gunsmith, had him go thru the while rifle, correct feed ramps, tourqe everything, add proper lubes and loc tights etc, she runs good now, point being if I gotta fix psa rifles I may as well build them myself🤷. I buy things from them, ammo, optics, accessories. But I can't trust a psa with my life. Rifles,weapon not done right are dangerous things I don't wanna be around while explosions are happening , thanks again for your honest review, most would say just send it back! PSA Gets too much slack for their bad QC, I just save some more and get a better quality rifle then the 3,4 $500 ones they offer 🤷
@sandymitchell8182 I appreciate that. Same here, I like what they're doing for the 2A, but their QC needs to be addressed. With the Sabre line, they're using really good components. I don't think anything on that rifle is made by them. Unless you get the non CHF variant. Then, the barrel is produced by them. Simple things like checking torque specs, adding a dimple, and some loctite elevated this rifle. Things that take very little time and effort made the biggest difference. I expect issues from their Freedom line but not the Sabre line that's being push as their upper tier and claimed to be aimed at "duty" use.
I have the same problem with the magnetic switch. It doesn’t work right waste of money.
@galacticknight8322 Sorry to hear that. 3 years later, and they still haven't corrected the issue.
Very good video man! Tons of good info for both the experienced and novice.
@DesertTactical thanks brother.
would have been nice if you actually made sure your camera was in focus
Does the criterion balance much better?
@@Dexter-nw2fe in my opinion, yes. Especially when used with a suppressor.
@@airborneivan nice, have a 13.9 core, and want to replace my 12.5 zion mid
@@Dexter-nw2fedefinitely don't think you can go wrong with Criterion.
@@airborneivan how smooth is the criterion recoil wise, basically the same? And any experience with BRT barrels?
@Dexter-nw2fe the recoil is nice, and the recoil impulse is pretty soft. I've got mine set up with a Vltor A5 buffer tube, A5-0 buffer, and Sprinco Green spring. Unfortunately, I have zero experience with BRT barrels. I was actually gonna buy one of their barrels, but they were out of stock, so I went with Criterion.
..
I have the same barrel in my SPR. MIne likes the Hornady Frontier 5.56 75 grain BTHP Match.
Have you tried the AAC 75 grain HPBT match ammo. I have a 16'' Criterion barrel I a testing accuracy with different ammo.
@@henrychristopher9131 I have not, but I'd love to try it. AAC is intriguing because of the price to performance. At least for the 77gr loads I've shot from them.
Your're shooting great. Look at those 3-4 shot groups where it's almost one hole out of a 12.5. I think you just need more consistency and patience by going to the range more often. Easier said than done, I know.
@@85November I used to live at the range. I'd be there every weekend. Ever since covid, once or twice a month, if I'm lucky.
Wow the XTAC Match performed great that second time. Sub 3/4 moa absolutely fucks
I mean they aren’t bad groups persay I think with hand loads you could get them better but my Lothar Walther shot everything under moa and with handloads its one ragged hole .2 groups…. On another build give them a try! I have the poly .223 wylde same length and nickel boron barrel extension
@LovesM855A1 I agree, but you could take just about any barrel and make it shoot good with hand loads. Shooting a wide variety of off the shelf ammo and seeing that consistency is key for me and more of an accurate representation. Also, we have to factor in the shooter. I have my good days and bad days. I'll have to check out that Lothar Walther barrel.
Great video. Just a dumb question, how did you get the hand guard off? Thanks!
@@doz03 it's just two allen bolts and a plate on the back side. It's simple to remove.
@@airborneivan Ok! I took the 2 bolts out. Pulled as hard as a could twist etc etc. can’t get it off for anything. But thanks!
@doz03 did you pull the plate out the right side? That plat is what those bolts screw into and they index on the barrel nut. If you don't pull that plate out, the handguard won't come off.
I appreciate you Thank you!
Hell yea
Do you know what the rifle weighs out of the box ?
@americankulak4596 I don't, but I can weigh it later, as I have it set up, and let you know what it currently weighs with an LPVO, BUIS, light, and sling.
@americankulak4596 just weighed it. With everything attached and an empty mag, it's 8 lbs 10.9 oz. Naked with no mag is 6 lbs 4 oz.
@@airborneivan right on. Appreciate it ! Thank you.
I'm a brand ambassador to WAS ask me anything
That's awesome. So far, I really like their products. I love the Pathfinder Chest Rig. The Recon PC is very comfortable, and I really like their Elastic Mag Pouches. I want to get my hands on their Elite Ops Helmet Cargo Pack. Looks like it would make a great day pack, and I like the ability to stow your helmet on the outside of the pack.
@@airborneivan the helmet back is okay. I have one and I do like it. Has a lot of compartments for storage. The recon PC is one of my favorites for sure. Plus the chest rig makes it adaptable
@Colt-p5v that's why I have both. I primarily run the chest rig, but being able to take that placard and put it on the Recon Plate Carrier is super convenient. I like having that system in place.
@@airborneivan then adding a back panel is great for plusing up any load out. A lot of their stuff is compatible with Crye kit
@Colt-p5v I've noticed. I'm interested in back panels but not quite sure how effective they'd be for a civilian, non proffesional role.
Had the same issue went I went to the range. My handguard started to move front and back and I was sure to torque to spec before heading out. Went back home and found the handguard screws came loose and the threads on the screws were completely stripped. Got replacement screws and invested in some red Loctite.
I have a 13.9 mid I’m waiting to build out from Criterion and I’m excited to see what it can do
Hey Ivan...be weary. The Romeo 7s on the higher brightness settings tend to bloom really bad. Almost obtrusive. The regular 7 did too, but no where near as bad as the 7s. I experience it both with the Red and Green version. It's an ok optic. I think at that price point there are a few others worth considering. But I look forward to seeing what you think. Still gotta plan a range day with Vit and bring together all the platforms. for review.
@christophnegron2827 yeah. I've noticed it can bloom pretty bad, depending on the setting and external lighting conditions. The biggest thing is the halo on the outer edge of the glass. It's not as bad as some have made it out to be, but just like the bloom issue, it's dependent on the setting and external lighting conditions. We need to link up for sure.
I like this plate carrier it I’m kinda worried you can’t run side plates on the cummerbund 😕
@TheJoeml85 the cummerbund is molle compatible, so you could run side plates if you find compatible pouches.
What mount can I use if I want to install on mlok
@@sebastian3540 any scout mount. Magpul is an easy one to recommend
@@airborneivan what the specific name for it ? 🙏
@@sebastian3540 Magpul M-LOK Offset Light/Optic Picatinny Rail Mount, Aluminum , Black a.co/d/1COx24y
my rifle is much more accurate with the right grain ammo and being match, it shoots exactly on target with sierra 168grain match, POF revolution DI 308 and just good with 147grain FMJ
Bro going to rob a baskin Robin's lmao.
77gr AAC w/ Sierra bullet has a bit more accuracy I have seen vs OTM
@climbhigh3094 I'm found the OTM so be more accurate out of my previous 12.5 barrel. I'll have to try them on this barrel..
Accuracy is cool, but let’s see a video at 2000 and 3000 rounds. And tell us what’s had to be done to it and what’s had to be replaced. After 700 is when these seem to start have issues and your at 650 rounds.
@HatsuneM1ku01 I didn't have any issues. I got to about 1200 rds, maybe a hair over. There are no issues to speak of, but it's PSA, and their QC is hit and miss. Maybe I got lucky. I sold the rifle when I was buying my house, so I won't be able to tell beyond the 1200 rds.
My PLXc has a weird amount of play back and forth in the magnification ring, like maybe a millimeter or so. Have you noticed that on yours?
@nabby119 I don't have any play Luke that. The only thing I had were the screws for the throw lever came loose. I'd check those and make sure that throw lever isn't the problem. Under the throw lever is a separate piece that is secured to the mag ring via set screws. That's what I found loose.
Thank you. I lost my wrench and needed to adjust the block. As it got dirty, it needed more gas and stopped ejecting.
Just ordered the 12.5 hybrid from Criterion hope i made a good choice
@@URMOMISCALLING I'm hoping I made a good choice as well.
I'm pretty happy with the rosco 12.5 k9 sage dynamic 556. Close to 3k 55gr 556 and it's still accurate like it's day 1.
@slavikarlov nice. I have a K9 12.5 as well. I really like that barrel. I've got over 1000 rounds on that one, and it's holding up just fine. Definitely accurate.
Umm you have a vertical grip on a pistol gun...good luck with the feds....
@danielroney2535 overall length is over 26" so it's legal. You can look it up on the ATF's website.
Average man size paper target head is the size of 3 soda cans.
It's a 556, your smallest targets should be the size of a soda can. If you can make it dance and fly up in the air, your rifle is accurate.
Do you have any aiming laser module review
I don't, but I'm planning on doing a review on the Perst 4 that I have. I just need to figure out a better way to film at night.
@@airborneivan zenitco one or clones?
@@mrguiltyfool Zenitco
@@airborneivan that must be $$$
@mrguiltyfool nope. Purchased it from IvanTactical.com and it arrived at my door 12 days later from Russia. That was 2 weeks before the Ujrain war kicked off. $450 out the door.
Thanks for the video! I do t know why PSA didn’t make these adjustable from the side instead of requiring a long hex key.
Very thourow video,thank you ! Unfortunately mine didn't come with that alen key😕 mine is not cycling the next round into the chamber, so needs to be opened more I'm guessing
Thank you. If you reach out to PSA's customer service department, they'll send you a replacement allen key.
I have one too and I love it and you did a fine job thank you
Thank you.
Since we're being hypercritical, your wheezing and heavy breathing while sitting is of serious concern.
What? Did I offend your favorite gun company??? Well, I wasn't sitting during the review, and there's no need to be concerned. That upper respiratory infection is gone.
I purchased one of their barrels over a month ago and it still hasn’t shipped. They told me they’re waiting on the barrels to come in from Florida. So now I’m questioning their manufacturing process as a whole.
I get it. I know their barrels are made by F.J. Feddersen so I don't know what their fulfilments process is like. I know I will run into another issue with my replacement barrel and working with CS to address it. I'll be making a video on that as well.
Nice video, I would like to ask do you know if it fits 7.62x39 AKM Magazines in the 4 fixed pouches ?
Great explanation, thanks
It depends on your need and intended use.
If it cost you $60 on ebay then yes.
But is the M640 REALLY worth the price tag?